Haul Out Challenges

Fall in the Midwest means it is time to close up our boat for the winter. Our summer slip is in Menominee, Michigan, our winter storage in Oconto, Wisconsin. We wanted to make the 24 mile trek south around the middle of September, before fall weather set in.

The second week of September, Hi-Seas Marina, informed us that the Harbor Hoist used to haul our boat out had broken down. Summer had returned after a week of cold, wet and dreary weather in Menominee so we weren't really in any hurry. We were mostly concerned about being on the water in miserable conditions in October. It took longer than anyone hoped, to get that travel lift back in working order. Hi-Seas doesn't have a lot of staging area for boats coming in for the winter. The slips are full of seasonal folks who try to stay in the water as long as possible. There wasn't a slip for us to go to while we waited. The broken hydraulic steering system put a damper in the fall routine at Hi-Seas. A hundred plus boats had to be hauled out before November. There wasn't much anyone could do about the situation except wait patiently. 

Finally, there was a slip open for us at Hi-Seas. We were relieved to take this big step in wrapping up the season. We left Menominee under dreary skies with winds expected to be 10-15 knots from the north. We headed out past the breakwater into gnarly rolling 5 foot waves with a 5 second interval, and gusting winds. Pointing Mystic into the wind, we attempted to raise our main. It was so rough that we gave up and turned east to take the rollers more from behind us. The waves continued to cause havoc, making for a very uncomfortable ride. Dave pointed Mystic's bow toward Green Island to steady us as we tried unfurling the jib. The gusts whipped the sail back and forth. It refused to stay filled so we abandoned the idea of sailing, continuing east under motor power, until we had a clear shot past Peshtigo Point. Only then could we head south for Oconto. This was exactly why we were anxious to get to Hi-Seas, inclement weather! By the time we got to Peshtigo Lighthouse, we both had bruised and bloody shins from getting knocked around the boat during the first hour of the trip.

Peshtigo Light

Once we passed the lighthouse, things calmed tremendously in the lee of Peshtigo Point. The rollers slowly disappeared and the wind lightened. We pulled into Hi-Seas marina in glass calm waters and glided into the slip we had been directed to. We didn't know the status of the broken Harbor Hoist so we expected to stay put for at least a couple days. In the morning we heard a knock on our hull. The travel lift repair had been completed the night before and we were coming out of the water. This was great news. Things were finally falling into place.

Mystic in the well

Harbor Hoist Ride

Setting Mystic on her keel for a good washing

Mystic was set in jack stands in the same spot as last year, next to the flagpole. Once we were settled, we had to get back to Menominee to pick up our truck. We'd planned to ride our bikes back, along scenic roads through Oconto, Peshtigo and Marinette. The 20 mile ride took 2.5 hours but that included a good half hour stop at a park where we rested and ate snacks. It was a good ride on a beautiful day!

Placing her on jack stands

Once we were out of the water, we had boat projects to do. First on our list was a few coats of varnish on the teak. In 2020, we'd put 10 coats on freshly sanded wood and added a couple coats each year since. It looked great but was starting to wear through in spots. In fact, when we scraped it, huge sections came off in one chunk with ease. We discovered that a lot of the 2020 varnish was separating from the wood. Instead of a couple quick coats for maintenance, we were facing a major varnish job.

We focused on the oak anchor windless first which was peeling like an orange. Dave decided to apply epoxy instead of varnish for a longer lasting finish. We spent all day scraping and sanding then added the first coat around 4:30 in the afternoon. In the morning, we realized the dew had gotten to the epoxy overnight before it could dry and we had a cloudy finish. Discouraged, we scraped and sanded the first coat down and added a new coat earlier in the afternoon. This time, it dried clear, giving us the glassy finish we strive for.

Sanded out Bowsprite

Next we began working on our teak toe-rail. Over summer, everyone commented on how beautiful our teak looked. Unfortunately, it was also compromised. We tried to lift all the worst spots and sand out the greying areas but some the 10+ coats had to be 100% removed. We approached our work one hour at a time. Trying to muster an attitude of making lemonade out of lemons by reminding ourselves how beautiful Mystic will be once we complete the dreaded teak work before us.

Although our end of season experience hasn't worked out smoothly, we are getting close to comfortable about leaving Mystic on the hard until spring. We still have to empty and clean her. Dave will build our winter cover frame and we'll install the cover. Tying it down takes about four hours. It's a lot of work closing down for the season but Mystic deserves the attention we give her. She's worth it!